SANTA BARBARA GUTTER INSTALLATION
How Much Do New Gutters Cost in Santa Barbara?
What new gutters cost per foot, by material, and what pushes a Santa Barbara quote up.
Updated October 2026 · By Gutters Santa Barbara
The short answer
Most houses have 100 to 200 linear feet of gutter. HomeGuide puts installation at $12 to $25 per linear foot, or $2,200 to $5,000 for an average home. This Old House prices a 2,000 sq ft home at $600 to $5,800, with $3,200 as the average.
Copper and zinc cost at least twice as much per foot as aluminum. In Santa Barbara, height, roof type and access move a quote more than anything else, so use these numbers to check a quote, not to replace one.
Cost per linear foot by material
| Material | Installed, per linear foot | 200 ft average |
|---|---|---|
| Vinyl / PVC | $8 – $12 | $571 |
| Aluminum | $10 – $20 | $1,535 |
| Steel | $10 – $35 | $1,716 |
| Copper | $25 – $40 | $5,749 |
| Zinc | $35 – $45 | Not listed |
Per-foot prices are from HomeGuide. The 200 ft averages are from This Old House. The two sources disagree on totals: This Old House’s averages sit near the bottom of HomeGuide’s ranges. That gap is normal for gutter pricing, and it’s why two written quotes are worth getting.
How long each material lasts is covered on our Gutter Replacement page.
How many feet of gutter does your house need?
Gutters run along the eaves, the roof edges water drains off. So the number that matters is the length of those edges, not the square footage inside.
| Home size | Gutter length (HomeGuide) | Gutter length (This Old House) |
|---|---|---|
| 1,500 sq ft | 150 ft | 150 ft |
| 2,000 sq ft | 180 ft | 200 ft |
| 2,500 sq ft | 200 ft | 250 ft |
Those tables are rules of thumb. A two-story 2,000 sq ft house has about half the roof footprint of a single-story one, so it usually needs less gutter, though each foot costs more to install at height.
How to measure your own house
- Walk the house and note every roof edge that drains water, including the garage, porch and any additions.
- Measure each run along the ground beneath it with a tape or a measuring wheel.
- Add one downspout run per corner where water should come down, measured from the eave to the ground.
- Add it up. That total is what an installer will price, and you can check their number against it.
What raises a Santa Barbara quote
| Line item | Typical added cost | Why it shows up here |
|---|---|---|
| Second story | $1 – $3+ more per linear foot | Hillside lots in the foothills make ladder setup slower on taller homes |
| 6-inch instead of 5-inch gutters | $1 – $2 more per linear foot | Large roofs and big tile-roof runs move a lot of water in a heavy storm |
| Downspouts | $30 – $75 each | Most homes need one per corner, plus more on long runs |
| Splash blocks or extensions | $10 – $50 per downspout | Keeps water off foundations and away from slopes |
| Removing old gutters | $50 – $200 | Almost every replacement job |
| Half-round or box gutters | Priced higher; no standard figure | This Old House notes they may need specialized materials or more experienced installers |
| Fascia repair | Quoted separately | Rotted boards often appear only once the old gutters come off |
Added costs are from HomeGuide except where noted.
Check the contractor’s licence
In California, a job of $1,000 or more, counting labor and materials, needs a licensed contractor. The CSLB raised that limit from $500 on January 1, 2025, and a full gutter install is almost always over it. Gutters fall under the CSLB’s C-43 Sheet Metal classification. You can look up any contractor’s licence on the CSLB website before you sign.
Big-box store, local installer or DIY?
Can you install gutters yourself? Not seamless ones. This Old House notes homeowners can’t install them because they need a rolling machine and special training. That leaves sectional gutters, sold in pieces, as the only DIY option. How seamless and sectional gutters compare is covered on our Gutter Replacement page.
Big-box stores also offer gutter installation. We couldn’t find a published Home Depot price as of October 2026, so ask for a written quote and compare it line by line with a local installer’s.
Whichever you choose, compare quotes on the same things: price per linear foot, gutter size and material, number of downspouts, removal of the old system, fascia repair terms, and the written warranty.
If you’d like a local quote to compare, call (805) 885-4786 and we’ll connect you with an independent Santa Barbara installer. Read more about gutter installation in Santa Barbara, or see what gutter cleaning costs once they’re up.
Common questions
How much is 200 linear feet of gutters?
About $2,000 to $4,000 for aluminum at HomeGuide’s $10 to $20 per foot, or $1,535 on average by This Old House’s figures. Copper runs $5,000 to $8,000.
How much should 100 feet of seamless gutters cost?
About $1,000 to $2,000 in aluminum, before downspouts and removal of old gutters.
How much do 6-inch gutters cost per linear foot?
HomeGuide puts the step up from 5-inch at $1 to $2 more per foot, so aluminum lands around $11 to $22 per foot.
How many linear feet of gutter does a 2,000 sq ft house have?
Usually 180 to 200 feet, by HomeGuide’s and This Old House’s tables. A two-story house that size often needs less, because its roof footprint is smaller.
Is 10 linear feet the same as 10 feet?
Yes. A linear foot is one foot of length along the gutter run.
Sources
Want a Local Quote to Compare?
Call and we’ll connect you with an independent Santa Barbara installer. Ask for a written, itemized quote.